General information

Academic year: 2023/2024

Level: Bachelor

Type: Bachelor's Degree

ECTS Credits: 300

Length of programme (full time): 5 YEARS

Mode of delivery: Face-to-face

Level of qualification: Máster (MECES level 3 - EQF level 7)

Model of study: Full-time (42-60 ECTS per school year)

Work-based learning (Practicum): Yes


More info:


Programme coordinator

Name: LEANDRO MOISÉS, MORILLAS ROMERO / lmorillas@ugrn7ysTWW.es


School of Architecture / Granada campus

Field(s) of education and training (ISCED-F)

  • Architecture and town planning (0731)

Main focus

This bachelor’s degree provides students with knowledge that will permit them to do the following:
(i) create and design architectural projects of new buildings and perform restoration and conservation projects;
(ii) carry out urban planning and urbanisation projects;
(iii) acquire expertise in project management, construction management, and the elaboration of technical reports as well as of surveys and health and safety projects. This degree programme gives graduates access to the Masters Programme (modification of the Royal Decree 1393/2007, section 9, article 12, submitted to the Council of Universities on 22 February 2010), which qualifies them for professional activity in the field of architecture. All of this according to the competences regulated in Organic Laws on Education 38/1999 (5 April 1999); 7/1997 (14 April 1997) and Royal Decree 2512/1977 (17 June 1977).

Competences

1. Create projects of new buildings, perform restoration and conservation projects, and carry out urban planning and urbanisation projects, based on functional, technical, and formal dimensions and specifications.
2. Possess an in-depth knowledge of the history and theories of architecture, restoration, and urbanism.
3. Design, calculate, and dimension building structures, taking into account their geotechnical behavior as well as the different forces and loads involved.
4. Design the building or urbanisation so that it is a harmonious whole.
5. Design, calculate, and dimension the installations in a building or urbanisation in consonance with the competences ascribed.
6. Understand and integrate building requirements and economic factors into the project during its design, its construction as well as its useful life.
7. Possess an adequate knowledge of administrative procedures related to urban planning and urbanisation projects.
8. Have the ability to work in a multidisciplinary team, using new technologies and regarding this as an added value.
9. Acquire leadership skills that also encompass a deep ethical, aesthetic, and technical commitment.
10. Direct and monitor the construction process in new buildings, in restoration and rehabilitation projects, and in landscaping and urbanisation projects.
11. Elaborate technical reports, expert assessments, and health and safety projects.

Programme qualification

Name of title awarded in original language

Graduado o Graduada en Arquitectura / Estudios Arquitectura

Qualification requirements

– The student must prove the level B1, in accordance with the Common European Framework of Reference for Languages.
– The student has to complete the ECTS credits of the study program distributed as follows: Basic Formation (60 ECTS) Obligatory (216 ECTS) Optional (18 ECTS) Final degree project (6 ECTS)

Access to further studies

This degree gives access to doctoral studies

Programme courses

Course Name Year Period
ANALYSIS OF ARCHITECTURAL FORMS 1 2nd Year 1st Semester
ANALYSIS OF ARCHITECTURAL FORMS 2 2nd Year 2nd Semester
ARCHITECTURAL COMPOSITION 1 3rd Year 1st Semester
ARCHITECTURAL COMPOSITION 2 4th Year 1st Semester
ARCHITECTURAL RESTORATION 5th Year 2nd Semester
ARCHITECTURAL SURVEYING 4th Year 1st Semester
ARCHITECTURAL TECHNICAL DRAWING 1 1st Year 1st Semester
ARCHITECTURAL TECHNICAL DRAWING 2 1st Year 2nd Semester
ARCHITECTURAL TECHNICAL DRAWING 3 2nd Year 1st Semester
BUILDING MATERIALS 1st Year 1st Semester
BUILDING MATERIALS AND TECHNIQUES 3rd Year 1st Semester
BUILDING SYSTEMS 1: INSTALLATION SYSTEMS, UTILITY SUPPLY, PLUMBING, AND ELECTRICS 2nd Year 2nd Semester
BUILDING SYSTEMS 2: HEATING, VENTILATION AND AIR CONDITIONING SYSTEMS, MECHANICAL ELEMENTS FOR VERTICAL SHIFT, AND FIRE PROTECTION 3rd Year 2nd Semester
BUILDING SYSTEMS 3: URBAN INSTALLATIONS, SUSTAINABILITY 4th Year 2nd Semester
CONSTRUCTION 1: LOAD-BEARING STRUCTURES (STEEL, WOOD, BRICK) 2nd Year 2nd Semester
CONSTRUCTION 2: LOAD-BEARING STRUCTURES (CONCRETE). BUILDING SYSTEMS IN RESIDENTIAL PROJECTS 3rd Year 1st Semester
CONSTRUCTION 3: BUILDING ENVELOPE (FAÇADE AND ROOFING). INTERIOR PARTITION WALLS AND CLADDING 4th Year 1st Semester
CONSTRUCTION 4: BUILDING PATHOLOGY 5th Year 1st Semester
CONSTRUCTION 5: MANAGEMENT AND IMPLEMENTATION OF BUILDING AND URBAN WORKS 5th Year 2nd Semester
EARTHQUAKE-RESISTANT STRUCTURES 5th Year 2nd Semester
FUNDAMENTALS OF MATHEMATICS FOR ARCHITECTURE 1 1st Year 1st Semester
FUNDAMENTALS OF MATHEMATICS FOR ARCHITECTURE 2 2nd Year 1st Semester
FUNDAMENTALS OF PHYSICS APPLIED TO BUILDING SYSTEMS 2nd Year 1st Semester
FUNDAMENTALS OF PHYSICS APPLIED TO STRUCTURES 1st Year 2nd Semester
FUNDAMENTALS OF STRUCTURES 3rd Year 1st Semester
FURTHER PHYSICS FOR ENVIRONMENTAL ARCHITECTURE 3rd Year 2nd Semester
GEOTECHNICAL ENGINEERING 5th Year 1st Semester
GRAPHIC CONCEPTUALISATION AND INTRODUCTION TO ARCHITECTURAL PROJECTS 1st Year 1st Semester
HISTORY OF ARCHITECTURE 1 1st Year 2nd Semester
HISTORY OF ARCHITECTURE 2 2nd Year 2nd Semester
INFOGRAPHICS AND HERITAGE 3rd Year 2nd Semester
INTRODUCTION TO CONSTRUCTION 1st Year 2nd Semester
INTRODUCTION TO THE HISTORY OF ART AND ARCHITECTURE 1st Year 1st Semester
LEADING-EDGE PRACTICES IN THE ARCHITECTURAL PROJECT 4th Year 2nd Semester
MATHEMATICS APPLIED TO ARCHITECTURE 3rd Year 2nd Semester
PREFABRICATION 4th Year 1st Semester
PROJECT MONOGRAPH 4th Year 1st Semester
PROJECTS 1 1st Year 2nd Semester
PROJECTS 2 2nd Year 1st Semester
PROJECTS 3 2nd Year 2nd Semester
PROJECTS 4 3rd Year 1st Semester
PROJECTS 5 3rd Year 2nd Semester
PROJECTS 6 4th Year 1st Semester
PROJECTS 7 4th Year 2nd Semester
PROJECTS 8 5th Year 1st Semester
PROJECTS 9 5th Year 2nd Semester
PROPERTY VALUATIONS 5th Year 1st Semester
STRUCTURES 1: STRUCTURAL ANALYSIS AND MEASUREMENT OF METALLIC STRUCTURES 3rd Year 2nd Semester
STRUCTURES 2: STRUCTURAL ANALYSIS AND MEASUREMENT AND REINFORCED CONCRETE FOUNDATIONS 4th Year 2nd Semester
STRUCTURES 3: HORIZONTAL PARTITIONS, TRIANGULAR SCREENS AND PRESTRESSED CONCRETE 5th Year 1st Semester
UNDERGRADUATE DISSERTATION 5th Year
URBAN HISTORY 3rd Year 2nd Semester
URBANISM 1 3rd Year 1st Semester
URBANISM 2 3rd Year 2nd Semester
URBANISM 3 4th Year 1st Semester
URBANISM 4 4th Year 2nd Semester
URBANISM 5 5th Year 2nd Semester
URBANISM AND LANDSCAPE MONOGRAPH 3rd Year 2nd Semester
VISUALISATION AND PRESENTATION TECHNIQUES APPLIED TO ARCHITECTURE 4th Year 1st Semester

Admission information

Access to Bachelor’s Degree programmes is granted to students with the following degrees/ diplomas or studies, or any other recognized as equivalent to these:
A.1. Spanish Bachiller, European Baccalaureate or International Baccalaureate.
A.2. Baccalaureate from European Union Member States’ education systems or other countries withinternational agreements.
A.3. Advanced Technician in Vocational Training, Advanced Technician in Plastic Arts and Design orAdvanced Technician in Sports Education, from the Spanish Education System.
A.4.Studies carried out in European Union Member States or in other countries with international reciprocal agreements which meet the academic requirements in those States to access their university studyprogrammes.
A.5. Official Spanish university degrees of Diplomado, Arquitecto Técnico, Ingeniero Técnico, Licenciado, Arquitecto, Ingeniero, Graduado or Máster Universitario.
A.6. Partial (foreign or Spanish) university studies.

Access to Bachelor’s Degree programmes is also possible for:
B.1. People over twenty-five after successfully passing a specific access test.
B.2. People over forty with work or professional experience related to a university field of knowledge.
B.3. People over forty-five after successfully passing a specific access test.

Likewise, access to Bachelor’s Degree programmes is granted to:
C.1. People meeting the requirements to enter university according to the Spanish Education Systemregulations prior to Ley Orgánica 8/2013, of December 9.

General regulations

Grading scale
In the Spanish university system, modules/courses are graded on a scale of 0 to 10 points with the following qualitative equivalence:
0-4,9: «suspenso»; 5-6,9: «aprobado»; 7-8,9: «notable»; 9-10: «sobresaliente». A special mention, «Matrícula de Honor» may be granted to up to 5% of the students in a group provided they have got a «sobresaliente». To pass a module/course is necessary to get at least 5 points.
In cases of recognition of ECTS, professional experience, cultural or sports activities, or student representation no grading will be recorded but, where appropriate, the word «Apto».

 

UGR Examination Regulations
https://docencia.ugr.es/sites/vic/docencia/public/inline-files/Normativa_de_evaluacion_y_calificacion_EN.pdf

 

More info on academic regulations at: 

https://ugrcat.ugr.es/en/about-ugr/#regulations

If you detect any errors or would like to suggest improvements for this page, please use our Comments and Suggestions form.
  • Comments and Suggestions

    Use this form to provide suggestions or to report any errors or problems concerning the UGRCat website.